Vision Eternity rebuildable RBA atomizer
The Vision Eternity RBA / rebuildable atomizer can be completely disassembled and reassembled. The atomizer coil is replaceable like with other rebuildable atomizers.
This atomizer features a screw-less wick/coil assembly for quicker installation and replacement of a new coil and wick assembly.
Just insert your coil in the poles, push on to the posts of the Eternity, and reassemble the Eternity.
This versatile atomizer can be used as a dripping atomizer (holding up to 40 drops of liquid), or as a tank-style atomizer with an Ego-T or Ego-C Type A cartridge .
The Eternity in tank mode offers several improvements over the standard Ego-T atomizer. The spike incorporated in the design of the Eternity offers better liquid transfer from the tank to the coil. "This new spike will also create a larger hole in an Ego-T and Ego-C Cartridge. We suggest using the replacement soft fill caps on the ego-t tanks with this atomizer."
The Eternity Atomizer kit includes all the necessary parts to convert between dripping and tank-style.
The Eternity is 510 threaded. It will work on most 510 threaded units. It also includes a threaded trim ring for a seemless look on ego series batteries.
Vision has worked long and hard to make the Eternity the best Rebuildable Atomizer on the market.
The quality, fit and finish you see in the product and packaging reflects the dedication VISION has had towards this product.
The Vision Eternity is made of precisely milled, highly polished chrome plated pure brass.
The kit includes the following :
-
Eternity Vaporizer (preset)
-
A 1 X stainless mouthpiece
-
B 1 X cone
-
C 1 X resistance base
-
D 1 X bolt base ego-T
-
E 1 X drip cone
-
F 1 X eGo-T body
-
1 X eGo Cartridge
-
2 X reserve pin attachment resistance + silica and Kanthal mounted
-
2 X silicone caps for cartridge conical tank
-
2 X silica cord with resistance wrapped
-
1 X user manual
-
1 X presentation box.
Specifications :
-
Brand: Vision
-
Weight: 112 g
-
Thread Type: 510
-
Color: Chrome
-
Material: stainless steel and copper chrome
The box is sealed as it was delivered by the manufacturer.
For using in Drip system (on drop) you need:
Parts: A B C D E G
Using Vision Eternity RBA on drop, it supports up to 1ml ( 40 drops )
For use in ego-T system you need:
Parts: A B C D F G
For eGo-T system you need a Imist cartridge , ego-c cartridge or ego-t cartridge.
Rebuildable atomizers are for advanced users, not average or beginner vapers with no multimeter or knowledge of how to use a meter to measure resistance etc...
The Eternity should not be used by the inexperienced or those without basic knowledge of electronics or ohm's law.
You can find separate resistance for Vision Eternity atomizer here :
There are currently no product reviews.
Write Review