SLB eGo-V v3 MEGA battery 1300mah PassThrough variable voltage 3-6V and variable wattage 3-15W
Specifications Variable voltage battery from Sailebao :
This is the newest battery released on market from Sailebao . The main extra feature , is the variable wattage , which was missing on the previous models ( slb ego-v2 and ego-v batteries ) .
The package contains the following :
Available colors :
Main Features :
Technical specifications :
How to use it :
On / Off mode
Clicking the power button 5 times steadily in 3 seconds will enable the battery . Meanwhile the power button will blink 5 times during this operation .
Atomizer and cartomizer compatibilty
The eGo-V V3 battery has a standard eGo/510 connection for maximum compatibility .
The digit screen will display load OHM automatically for 2 seconds when there is any connection load in the battery . If you connect a short circuit atomizer/clearomizer or if it's resistance is lower than 1.2 ohms it will show "LOR" and the battery won't work even if you press the power button .You also can hold the "-" button simultaneously to show the load OHM .
Variable voltage ( vv ) and variable wattage ( vw ) mode
Voltage can be adjusted from 3.0V-6.0V in 0.1V increments by simply pressing de "+" and "-" buttons . Once you reach the higher or lower ends of the voltage range it simply cycles around either way ( for example : pushing down at 3.0 takes you to 6.0 , pushing up to 6.0 takes you to 3.0 )
Wattage can be adjusted from 3.0W-15.0W in 0.5W increments by simply pressing "+" and "-" buttons . Once you reach the higher or lower ends of the wattage range it simply cycles around either way ( for example : pushing down at 3.0 takes you to 15.0 , pushing up to 15.0 takes you to 3.0 )
Switch the mode
Holding "+" button simultaneously for 5 seconds , the ego-v v3 will switch VV to VW or VW to VV . There are "V" or "W" symbols on the right side of the digit display when you make the switch .
Lock the selected voltage or wattage
You can lock the setting by holding the "+" and "-" buttons simultaneously for 3 seconds after setting your voltage or wattage , so no accidental voltage/wattage changes are made .Repeating the process to activate the buttons symbol shows on the digit display when they are locked and disappear when unlocked .
14 seconds safety cutoff
If the button is held down for 14 seconds or longer the ego-v v3 will shut itself off and become locked , until the button is released and unlock by 5 clicks of the button . Protect you and the device from situations where it's in your bag or pocket and something were to accidentally activate the swithc without your knowing .
The digit display will enter sleeping mode and shut itself down if no operation on the "+" and "-" buttons for 20 seconds , even if you press the power button .
You are able to use the battery when it's charging .
How to charge
The eGo-V V3 needs to be recharged when the battery indicator flashes repidly and prodouces no mre vapor . Use the included cable , connect the battery and the power outlet/USB port of your computer , USB home charger or USB car charger . The battery indicator will cycle while charging . When battery indicator stop circulating and stays at full , the charging is complete .
Normal charging time should be around 3-4 hours for eGo-V V3 battery . We suggest that you charge in time when the battery power below 10% ( that means 1 bar in the battery symbols )
The eGo-V V3 can be charged and used 300 times approximately .
There are currently no product reviews.
26.99€Add to Cart
13.49€Add to Cart
68.95€Add to Cart
23.48€Add to Cart