SLB eGo-V v3 VV and VW battery with Vigor BDC dual-coil atomizer kit.
Package content:
-
eGo-V v3 Sailebao battery with variable voltage and wattage;
-
Vigor BDC dual-coil atomizer;
-
usb charging cable for eGo-v v3 SLB battery.
SLB EGO-V V3 MEGA BATTERY 1300 mah with VV and VW:
The main upgrade feature is of course the Variable Wattage feature. There are also extra safety features added and improved wiring in the V3.
Main Features:
-
Variable Voltage: 3.0v to 6.0v in 0.1v increments.
-
Variable Wattage: 3.0w to 15.0w in 0.5w increments.
-
Easy OHM Meter ON/OFF switching
-
USB Pass Through with 103 cm cable.
-
510/eGo Connection capability
-
OLED LCD screen
-
14 SECOND VAPING CUT-OFF
-
Short circuit or low resistance safety - unit will cut off power and display "LOR" on the LCD screen.
-
LCD Sleep mode - LCD will not display if either the "+" or "-" buttons are not pressed for 20 seconds - conserving battery life.
Operating the SLB Mega V3:
-
ON/OFF: Click the fire button 5 times within 3 seconds to toggle the unit on and off.
-
Ohm/Resistance Meter:Press and hold the "-" button about 2+ seconds and it will display the atomizer resistance.
-
SLB Button Lock: So that you don't accidentally press the buttons when carrying in your pocket or your purse or otherwise just using the unit you can press and hold both "+" and "-" buttons simultaneously for about 5 seconds and a small LOCK icon will appear indicating that your unit is LOCKED and the buttons are inactive and you can't accidentally change your wattage or voltage.
-
Swithching between variable voltage and variable wattage: Press and hold the "+" button about 2+ seconds to toggle back and forth between voltage and wattage variable modes. I small "v" for variable voltage or a small "w" for variable wattage will appear on the screen.
-
Changing the voltage/wattage level: Press the "+" or "-" buttons to go up or down. The unit will "round robin" when it reaches the end on either extreme.
-
Dimension and Metrics: Length: 132mm without cartomizer, Width: 15.9mm
-
1300mah battery capacity
-
Maximum Current Output: 2.5AMP
-
Input: DC 5V 500mA
-
Charging Time: 3-4 hours. It is suggested to charge the unit when you are down to 1 bar on the charge level on the LCD screen, this will ensure longer battery life.
Vigor BDC clearomizer with 2ml capacity:
The Vigor BDC may look a lot like any other CE5 clearomizer in terms of styling, but that is where the similarities end. This new style of bottom coil clearomizers features a wickless dual heating element to provide increased vapor while also taking advantage of a bottom feed design so that the coils are always being fed just enough juice. Also, the tank has a capacity of approximately 2ml of e-liquid.
Thread: eGo.
Resistance: 2.2 ohm.
Stainless mouthpiece is not detachable.
To fill the clearo with liquid, just unscrew the bottom part, turn the clearo upside down and pour liquid inside. After filling reattach the base (bottom part) and you`re ready to vape.
There are currently no product reviews.
Write Review