Welcome to our store!
    English Romana German Italiano Dansk Srpski French Espanol Russian Turkish Bulgarian Japanese
Shopping cart
Items: 0 items Total: 0.00RON
go to cart

Provic S3 VV Mod 3V-6V Kit


Price: 241.38RON 298.49RON 19 % DISCOUNT
  • Description
  • Comments (0)
  • Similar products
Provic S3 VV Mod 3V-6V Kit.
 
Package  includes
  • 1 x  JOYELIFE provic mod
  • 1 x  clearomizer
  • 1 x  charging adapter
Main Functions:
 
1. Battery spec
 
1) Provic S3 works with 18650lithium-ion battery.
 
2) Recharge: take out thelithium-ion battery and recharge with dedicated charger till it’s full charged.
 
 
2. Working parameters
 
1) Resistance >0.8ohm atomizer is recommended
 
2) Quiescent current: <100uA
 
3) With RMS and average voltage outputfunction, voltage output error is ±0.1V
 
 
3. Basic functions
 
1). Power on: OLED shows “JOYELIFE”, Vibration motorshake one time and enter the key lock status.
 
2). Limited time protection: When smoking timeexceeds the setting time ,output will be forced to be shut down.
 
3). The OLED screen will show “Please ChangeBattery”while the voltage is below 3.4v, it means the voltage is too low to besmoking, the device need to be recharged.
 
 
4.Features
 
1. RMS and Mean average voltage output: Outputvoltage is 3.0v-6.0v and error is ±0.1V, Automatically match the atomizer resistanceand to achieve the same amount of smoking.
 
2. Button/Knob: 31 voltages can be adjusted.
 
3. Resistance measurement function: Test theactual resistance of atomizer.
 
4. Display functions: Display the currentbattery level, voltage output, atomizer resistance, puffs, remaining puffs andsmoking timeout.
 
5. Reverse battery protection function: Control Board will start protection function to protect the Components and battery in case of the battery reversed.
 
6. Low voltage alarm: the OLED will alarm while the voltage is low 3.4V to protect thebattery.
 
 
5.Operation Method
 
1. Lockbutton: in the locked position, press 5 times ina row to unlock, the OLED will display JOYELIFE and start the normal working status.In normal workingconditions, press 5 times to lock. It can not be smoke in lock status.
 
2. Voltage increases: In the voltage display interface, turn around the buttonclockwise, the voltage adjusts from 3.0V to6.0V in 0.1v increments.
 
3. Voltage decrease: In the voltage display interface, turn around the buttonanticlockwise, the voltage adjusts from6.0V to 3.0V in 0.1v decrease.
 
4. Setup menu: In sleep mod status or voltage display, press thebutton 3 times in a row will enter setup mode, rotate the encoder to select,then press the button.
 
5. Puff info: To enter the Setup mode, turn around the encoder toselect “Puff info” then press the button to set the puff info.
 
5.1) To enter the submenu of the set puff, turn around theencoder to select the “Set puff”, then press the button to set the puffs.When the cursor blinks, turn around the encoder to movethe cursor, or press the button to fix the cursor and setting thenumeral value that from 0001-9999 puffs what the user want. after settingsuccessfully, select Exit to exit submenu and return to the previous menu.
 
5.2) Reset puff: to enter the submenu of the set puff, thenpress the button to select the “Reset the puffs”to clear the puffs.
 
5.3) To enter the submenu of the set puff, turn around theencoder to select the“Total puff” to show the total puff being smoked.
 
5.4) Puff time: to enter the submenu of the set puff, turnaround the encoder to select the puff time 6s~30s.
 
 
 
6. Lock timeIn the setting mode, turn around the encoder and selectthe lock time for 30 Mins/60 Mins/Never. After setting successfully, select Exit to exit submenu and return to the previous menu.
 
 
7. VibrationIn the setting mode, turn around the encoder and select vibration for setting the vibration of motor or on/off. after setting successfully, select Exit to exit submenu and return to the previous menu.
 
 
8. MobileIn the setting mode, turn around the encoder and selectthe power bank mode or on/off. after setting successfully, select Exit to exitsubmenu and return to the previous menu. When the device is on mobile powersupply mode, it can not be used for smoking but only for recharging for otherdevices, and the output voltage is around 6v, the device will exit the mobileon while low voltage of battery or the resistance is lower than 5ohms.
 
 
9. ScreenIn the setting mode, turn around the encoder and selectthe screen to setting the light time of OLED , options 5 sec/10 sec/30 sec/60sect. after setting successfully, select Exit to exit submenu and return to theprevious menu.
 
 
10. Output In the setting mode, turn around the encoder and selectthe output for setting output.Turn about the encoder again and press the button forsetting the output mode options RMS/Mean/. After setting successfully, select Exitto exit submenu and return to the previous menu.
 
 
11. My deviceIn the setting mode, turn around the encoder and select “Mydevice” for setting the device info. Turn around the encoder again and pressand the button for setting the info of name/user info/ohm, after settingsuccessfully, select Exit to exit submenu and return to the previous menu.
 
 
12. SleepIn the setting mode, turn around theencoder and select the Sleep, device will quit setting menu for sleep.
 
 
13. ExitIn the setting mode, turn around theencoder and select Exit to exit the setting mode of the device.
 
 
14.Short circuit protectionThe screen will display atomizer short in case of short circuit at the output in smoking mode or mobile power supply mode. You have tocheck the electrode carefully for both atomizer and battery body.
 
 
15. Low load protectionScreen will display low resistance whilethe output resistance is lower than 1.2ohmin smoking mode or lower than 5ohm in the mobile power supplymode, and the device will exit output automatically.

There are currently no product reviews.



Write Review
eVic Mod Kit - Original from Joyetech

eVic Mod Kit - Original from Joyetech

eVic Mod Kit Original from Joyetech™  is the newest product released by the famous manufacturer . The new eVic Mod with Variable Voltage satisfy all requirements of the electronic cigarette smokers .With Variable voltage, adjustable between 3 and 5 volts and adjustable power between 2 watts and 15 watts provide fully configurable vaping experience for everyone .   The LCD display indicates the following functions : Battery level Current voltage ...

Price:

297.32RON

420.65RON Add to Cart
Smoktech GROOVE 2 VV/VW 3800mah battery MOD

Smoktech GROOVE 2 VV/VW 3800mah battery MOD

Smoktech GROOVE 2 VV/VW 3800mah battery MOD This is the New Groove 2 from Smoktech . The problems with some version 1 groove mods have been solved . This is a variable voltage, variable wattage  box mod. the Groove adjusts from 3.0 to 6.0 Volts in 0.1 volt increments or 3.0 to 15 Watts in .5 Watt increments and has a small back lit OLED display.  The Groove has a maximum output of 5 Amps.  The Groove can read your output voltage, battery voltage and cartom...

Price:

192.21RON

279.28RON Add to Cart
Kit Lavatube L-Rider Transformer

Kit Lavatube L-Rider Transformer

MODEL L-RIDER TRANSFORMER The Kit contains the following : -L-Rider Transformer body -2 batteries 18650 with a capacity of 1800 mAh -TrustFire TR001 charger -2 Clearomizers CE5 without wick -eGo Case -Intructions manul in english Technical characteristics L-Rider Transformer body : Length : 136 mm (with 18650 battery ) or 107 mm ( with 18350 battery ) Diameter : 22 mm Material : Chrome Model : Transformer Certifi...

Price:

241.38RON

406.80RON Add to Cart
Innokin iTaste MVP 2.0 with iClear 30 full kit

Innokin iTaste MVP 2.0 with iClear 30 full kit

Innokin iTaste MVP 2.0 with iClear 30 full kit The iTaste MVP 2.0 is a 510/Ego threaded device with a built-in 2600mAh battery. This box mod is loaded with features such as VV, VW, passthrough function, LCD screen, ohm meter and can even be used as an on-the-go charger for your portable devices.  The new function of MVP2.0 is variable wattage (you can adjust output wattage from 6.0 - 11.0 W in 0.5 watt increments) . It also have other substantial improvements in both appeara...

Price:

192.21RON

251.17RON Add to Cart
Innokin iTaste SVD original telescopic mod with variable voltage/wattage

Innokin iTaste SVD original telescopic mod with variable voltage/wattage

Innokin iTaste SVD original telescopic mod with variable voltage/wattage The iTaste SVD very well be Innokin's finest advanced personal vaporizer to date. This APV is packed to the brim with useful features. Not only that, but the SVD is a real powerhouse.  You could say that the Innokin SVD packs beauty, brawn and brains all in the same package!   Innokin's hot new device starts out with a telescoping body that features two swappable tube sizes. This allows ...

Price:

133.80RON

247.77RON Add to Cart
Vamo Body - Detachable VV and VW Mod

Vamo Body - Detachable VV and VW Mod

Vamo Body - Detachable VV and VW Mod This Vamo body with variable voltage and variable watts it is a new well designed mod . It's special feature is that it is detachable and it can work with a 18350 battery ( having mounted just a mini segment ) or two 18350 batteries ( having mounted two mini segments ) . It can also work with a 18650 battery ( two mini segments ) . The output voltage can be adjusted from 3V to 6V in steps of 0.1V and the working power from 3 Watts to 15 Wa...

Price:

169.07RON

208.37RON Add to Cart
Smoktech Vmax Variable Voltage Electronic Cigarette ( VV Mod ) - full kit

Smoktech Vmax Variable Voltage Electronic Cigarette ( VV Mod ) - full kit

Smoktech Vmax Variable Voltage Electronic Cigarette ( VV Mod ) This is an elegant and stylish variable voltage mod , which combines the performance with an accessible price . It has long autonomy batteries and it can be totally customized on your taste . You can very easily visually adjust the voltage , in steps of 0.1 V from 3V to 6V . Short description of Vmax Variable voltage mod:  Variable voltage from 3V to 6V with 0.1 V LED display , which allows you to ch...

Price:

192.21RON

348.48RON Add to Cart
Kit Lavatube Robust 14500 - model 2013 - bonus 30ml e-liquid

Kit Lavatube Robust 14500 - model 2013 - bonus 30ml e-liquid

2013  Lavatube Robust 14500 The Kit contains the following : -Lavatube Robust 14500 body -2 Li-ion batteries 14500 with a capacity of  650 mAh and protection -Clearomizer CE4 -Charger for batteries -eGo Case -Intructions manul in english bonus 30ml e-liquid Technical characteristics Robust 14500 body : Length : 106 mm Diameter : 17 mm Model : Robust Certificates : CE,RoHS,UL,UN38.3 Manufa...

Price:

192.21RON

290.19RON Add to Cart
Vmax - Stainless steel VV Mod - body

Vmax - Stainless steel VV Mod - body

Vmax - Stainless steel VV Mod The Vmax stainless steel mod is the latest vmax mod . This is an elegant and stylish variable voltage mod , which combines the performance with an accessible price . It has long autonomy batteries and it can be totally customized on your taste . You can very easily visually adjust the voltage , in steps of 0.1 V from 3V to 6V . Short description of Vmax Variable voltage mod:  Variable voltage from 3V to 6V with 0.1 V LED display...

Price:

262.77RON

301.85RON Add to Cart
Hana Modz V3 Mini Black DNA 30 E-Cig Mod

Hana Modz V3 Mini Black DNA 30 E-Cig Mod

Hana Modz V3 Mini Black DNA 30 E-Cig Mod.   Product Details:   510 threaded connector Variable Wattage from 7W-30W in 0.1 watt increment Body is made of anodized aluminum OLED display shows battery charge state, volts and ohms Built in 1500mah Lithium Polymer battery Micro-USB charging port Compatible with 0.5ohm~3.3ohm atomizers Input voltage/current: 3.2-4.3V/1.5-7A Output voltage/current: 4-8V/10A Random se...

Price:

297.32RON

390.48RON Add to Cart