Welcome to our store!
    English Romana German Italiano Dansk Srpski French Espanol Russian Turkish Bulgarian Japanese
Shopping cart
Items: 0 items Total: 0.00RON
go to cart

UDT-S Mini mod - fully mechanical


Price: 62.20RON
  • Description
  • Comments (0)
  • Similar products

UDT-S Mini mod - fully mechanical

The UDT-S is a mini sized mechanical mod from Youde, the manufacturer of the AGA T2 and many other rebuildable atomizers.  The UDT-S is designed to be used with a single 18350 battery .
 
The UDT-S is made of a very thin stainless steel and has a soft, muted finish.  This is definitely NOT a finger print magnet. This mod has full, exposed EGO threads so virtually all EGO and 510-threaded devices will fit.
 
This is a great value.  Compact and gives a good vape.  It is incredibly lightweight, has a great finish and a responsive mechanical button.  There are three large vent holes in  the bottom cap for safety.
 
If you are looking for a easy-to-carry, reliable mod at a great price, then this is it your mod !
 
The UDT-S is a fully mechanical mod.  There are no electronics controlling or limiting the voltage being supplied to the atomizer.  As such, when you insert a fresh cell, you will be getting approximately 4.2 volts (unloaded voltage).  This will slowly decrease as you discharge the battery.
 
Because of the mechanical nature of the device, there is no over discharge protection.  If you are using IMR or IFR cells or unprotected ICR cells (not recommended) be sure not to over discharge them.  You could ruin the cells or even worse have a cell failure that could cause an explosion or fire.
 
There are also no other protection circuits like there are in APVs with electronic switches.  Atomizing devices that short circuit can ruin the device and or your batteries.  This is an advanced user device.  Please be sure you understand enough about batteries and circuits before you use it.
 
Technical specifications :
  • Thread : 510/ego
  • Material : Stainless steel 
  • Length : 80mm ( full length ) 
  • Diameter : 22mm
  • Weight : 41 grams
  • Battery compatibility : only 18350 batteries 
 

There are currently no product reviews.



Write Review
UD AGA-TD rebuildable dual coil atomizer with pyrex glass tank

UD AGA-TD rebuildable dual coil atomizer with pyrex glass tank

UD AGA-TD rebuildable dual coil atomizer with pyrex tank The AGA-TD RBA atomizer is a genesis style atomizer made entirely of 304 grade stainless steel ( including center pole ) and with a tank made of pyrex glass. It has two large air holes located on the top cap. Its designed with two negative and one positive post for dual coil builds. The package includes the following : 1 x UD AGA-TD rebuildable dual coil atomizer with pyrex tank 1 x Resistance wire 1 x Mesh ...

Price:

52.72RON

79.22RON Add to Cart
AGA-T+(V2) Stainless steel Rebuildable Atomizer

AGA-T+(V2) Stainless steel Rebuildable Atomizer

Rebuildable AGA-T+(V2) tank , genesis style atomizer . This is the upgraded version of AGA-T atomizer . It is made from 304 grade stainless steel and the tank is made of polycarbonate( or glass if you want ) , having a capacity of 3.2 ml . It is used with stainless steel mesh for wicks . It has a press on cap system for the adjustement of the airhole . This is an advanced user piece , especially for moders . It will require a certain level of mechanical skills and knowledg...

Price:

101.19RON

125.56RON Add to Cart
Vapo V5 Stainless steel mod 14500

Vapo V5 Stainless steel mod 14500

Vapo V5 Stainless steel electronic cigarette MOD . This mod is compatible only with 14500 batteries .  The package includes the following :  Body Vapo V5 stainless steel (without battery) Technical specifications : Color: Stainless Steel Thread : eGo/510 Polished surface  Working Voltage: 3.7V Compatible batteries : 14500 batteries Length : 102mm Diameter : 17mm Weight: 72g You can use this battery fo...

Price:

103.74RON

Add to Cart
UD AGT Titanium RBA - Rebuildable Atomizer with Pyrex Tank

UD AGT Titanium RBA - Rebuildable Atomizer with Pyrex Tank

UD AGT Titanium RBA - Rebuildable Atomizer with Pyrex Tank. Made by Youde Technology the maker of the AGR, AGI, IGO-L tanks and rebuildables among others, the AGT is constructed of Titanium which is lighter and stronger that stainless steel. It is all Titanium except for the screws and some of the internal parts.  This does not come pre-coil and meshed but it does come with a small parts packet that has spare screws, o-rings and a piece of mesh. The AGT provides a thick Pyrex gla...

Price:

101.19RON

132.93RON Add to Cart
Premium Vapo detachable mod 18650/18350/16340

Premium Vapo detachable mod 18650/18350/16340

Premium Vapo detachable mod 18650/18350/16340 This mod is compatible with 18650/18350/16340 batteries . Batteries are not included , you can purchase them separately . This mod is detachable , the lower part can be removed and it becomes a mini mod . It is very practically . Technical specifications : Body Color: Gun black  Chromed head and bottom Thread : eGo/510 Working Voltage: 3.7V Compatible batteries : 18650/18350/16340&...

Price:

97.87RON

AGA-T Rebuildable Atomizer

AGA-T Rebuildable Atomizer

Rebuildable AGA-T atomizer  This is an advanced user piece , especially for moders . It will require a certain level of mechanical skills and knowledge to able to use and rebuild properly.  With some little knowledges it can be assembled / disassebled in few minutes , being very easy to clean . The package contains : 1 X AGA-T rebuildable atomizer 1 X wire resistance 1 X silica 1 X extra Oring 2 X Oring seal 1 X replacement Screw...

Price:

110.73RON

AGA-S Stainless steel Genesis RBA Atomizer

AGA-S Stainless steel Genesis RBA Atomizer

AGA-S Stainless steel Genesis RBA Atomizer  This is a tiny rebuildable Genesis style atomizer  . It is made from 304 grade stainless steel and it's capacity is 2 ml . You can use as a wick mesh , or silica if you want . Thread-less top cap , means you can position the air hole to be exactly where you want ! This is an advanced user piece , especially for moders . It will require a certain level of mechanical skills and knowledge to able to use and rebuild pro...

Price:

101.36RON

Add to Cart
UDT mod standard - mechanical mod 18650/18350

UDT mod standard - mechanical mod 18650/18350

UDT mod standard - mechanical mod 18650/18350 The UDT standard mod is a mechanical mod from Youde, the manufacturer of the AGA T2 and many other rebuildable atomizers.  The UDT-S is designed to be used with two 18350 batteries or one 18650 battery .   The UDT standard mod is made of a very thin stainless steel and has a soft, muted finish.  This is definitely NOT a finger print magnet. This mod has full, exposed EGO threads so virtually all EGO and 510-threaded devi...

Price:

67.98RON

Vapo Telescope mechanical mod 18350/18500/18650

Vapo Telescope mechanical mod 18350/18500/18650

Vapo Telescope mechanical mod 18350/18500/18650 This mod can use different types of batteries ( 18350 , 18500,18650 ) because you can adapt it's size by unscrewing / screwing the moving part on the fixxed part of it ( telescope mod ) . It has a special design and a glossy chromed color . Very easy to use , you can achieve great perfomance with it and it can satisfy any vaper . Technical specifications : High Glossy Chrome Color Working Voltage:3.7-7.4V - The ...

Price:

91.16RON

152.09RON Add to Cart
UDS-T Stylus eGo-T 1100 mah battery

UDS-T Stylus eGo-T 1100 mah battery

UDS-T Stylus eGo-T 1100 mah battery This is a new model of battery with stylus functionaly for your Iphone,Ipad,tablet or other touch screen device . It has 5 click protection system and a new beautiful and stilish design . The battery is compatible with all eGo-T / 510 / CE4 / CE5 atomizers and many more with ego/510 thread . Technical specifications :   Thread : eGo/510 Color : Black matte Output voltage : 3.7V 5 click protection Capacite...

Price:

74.93RON

Add to Cart

Customers who bought this product also purchased