Welcome to our store!
    English Romana German Italiano Dansk Srpski French Espanol Russian Turkish Bulgarian Japanese
Shopping cart
Items: 0 items Total: 0.00RON
go to cart

Tesla mod with variable voltage and variable wattage


Price: 189.53RON
  • Description
  • Comments (0)
  • Similar products

Tesla mod with variable voltage and variable wattage.

The Tesla has an OLED screen, and features great, well placed buttons. It is built well, works well and is definitely worth owning! The Tesla is the same length as the VAMO in full size. It has an ergonomically slotted tube.You can use most eGo -510 style clearomizers/ atomisers/ cartomizers, etc…

This APV fits perfectly in the hand, is light weight (made from aluminium), and very easy to operate.This would easily fit into any seasoned vaper’s collection or even make a great beginner mod, for a diligent first timer.

The package contains:

  • Tesla VV and VW Mod;
  • mini user manual;
  • presentation box.

Available colors: stainless and black.


TESLA, functions and features:

1. Constant voltage and Constant wattage(dual mode output). In constant voltage mode, the output voltage can be adjusted between 3.0V - 6.0V in increments of 0.1V. In constant wattage mode, the output power can be adjusted between 3.0W and 15.W in 0.5W increments.

2. Single cell 3.7V battery input operational voltage is 3.2V - 5.0V

3. Button adjustments allows you to choose between 25 possible wattage settings, and 31 possible voltage settings.

4. Atomiser resistances check function, which can test and display the resistance of the atomiser in Ω.

5. OLED display, which can show the battery input and output voltage, atomiser resistance, output power, or short-circuit warnings.

6. Short circuit protection, and reverse battery installation protection. If the battery is installed backwards, the control panel will switch to protected mode, so that is doesn’t damage the internal components of the Tesla.

7. Low voltage warning, will stop use of under-charged batteries and display the “Low V” warning.

8. Short circuit and unsafe amperage protections. the Tesla should detect external short circuits and disengage to protect the user.The Tesla will also detect if the attached atomizer resistance is too low to safely draw current. In both cases the Tesla will disengage output automatically.


User Operation:

Upon the Tesla’s system start up, the Screen will boot up with the word Tesla, if the battery is low the display will boot with the words “Low V”. During the boot sequence of this device, do not attempt to operate any functions, but allow the device to boot into standby please. When the system boots into standby, use the fast click (5 click on/ off function) to turn the device on. The word Tesla will display on the screen. If the battery voltage is sufficient for operation, the system will turn on and display the message “System on”. Upon first turning the system on, the output will be in a “locked” state, press both the - and + buttons at the same time to switch the unit into an unlocked state, and you will be able to adjust operations. The large button is your activation button. To toggle the device between on or off, you need to fast-click the activation button 5 times (button presses must be very fast, within two seconds.) When the unit is off, there will be no output from the Tesla, and the OLED will not display. When on, the Tesla will be ready to use. The - (minus) button is the voltage and wattage reduction button. Pressing "-" , will adjust the current value of either voltage or wattage down, and the corresponding voltage, or wattage numbers will be displayed on the OLED screen. When the unit is adjusted below 3.0V, or 3.0W, it will cycle back to the highest setting (6.0V or 15W.) The "+" (plus) button is the voltage and wattage increase button. Pressing "+" will adjust the current value of either voltage or wattage up, and the corresponding voltage or wattage numbers will be displayed on the OLED screen. When the unit is adjusted above6.0V, or 15W, it will cycle back to the lowest setting (3.0V, or 3.0W.) To check the Battery voltage, hold the "-" button down for two full seconds while the OLED screen is on and unlocked. The Screen will then display the battery’s current operational voltage. To check the atomizer resistance, hold the "+" button down for about two seconds while the OLED screen is on and unlocked. The screen will then display the connected atomizer’s resistance. To toggle the device between locked and unlocked output states, press both the "–" and "+" at the same time. To access the Tesla menu, hold the "+" button for about eight seconds. The menu interface will allow you to adjust 3 Tesla settings.

 

1: When the interface displays “Power Voltage”, you can use this menu option to change between‘Constant wattage’ and ‘Constant Voltage’ mode for the device.Pressing the - button will switch between the two menu options.

2: When the OLED interface shows the word “Power” the device will be set into constant wattage mode, and regulate itself via calculated wattage output.When the interface shows the word “Voltage” the unit will be set in constant voltage mode, and will regulate itself via output voltage.

3: When the Tesla interface displays the words “LCD Display”, you can use this menu setting to adjust the content displayed on the OLED screen during use. Pressing the - button will switch between menu options.

4: The menu setting “Voltage”, will display the output voltage or wattage of the Tesla on the screen while in use.

5: The menu setting “Resistance”, will display the Ω resistance of the atomizer during use.

6: The setting “Battery”, will display the current output voltage of the battery you are using on the OLED screen during use.

7: The final menu option“ON/OFF” will toggle the OLED display on the Tesla to either active or inactive during the use of the device.As with other menu options, you can use the –button, to toggle between settingsIn the menu mode, the + button is used for cycling menu categories, and the - button is used to confirm the setting. Using these two buttons, you will be able to navigate the Tesla menu. The menu navigation will exit after no buttons have been pressed for about three seconds.

8: When the system powers down via the fast click (5 click) function, the OLED will display the word Tesla and upon successful shut down will display the words “system off”, which indicates a successful shut down.

9: When an atomizer is attached with a resistance lower than 1.2 Ohms, the Tesla display will show“Low Resistance”, and cease function until an appropriately built atomiser is connected.

10: When an output short circuit is detected the screen will display the words “Short”

11: When the battery voltage is below 3.2V, the unit will display “Low V” on the screen, when you attempt to activate it. The unit will resume normal function when appropriately charged batteries are installed.

There are currently no product reviews.



Write Review
eVic Mod Kit - Original from Joyetech

eVic Mod Kit - Original from Joyetech

eVic Mod Kit Original from Joyetech™  is the newest product released by the famous manufacturer . The new eVic Mod with Variable Voltage satisfy all requirements of the electronic cigarette smokers .With Variable voltage, adjustable between 3 and 5 volts and adjustable power between 2 watts and 15 watts provide fully configurable vaping experience for everyone .   The LCD display indicates the following functions : Battery level Current voltage ...

Price:

297.32RON

420.65RON Add to Cart
Smoktech GROOVE 2 VV/VW 3800mah battery MOD

Smoktech GROOVE 2 VV/VW 3800mah battery MOD

Smoktech GROOVE 2 VV/VW 3800mah battery MOD This is the New Groove 2 from Smoktech . The problems with some version 1 groove mods have been solved . This is a variable voltage, variable wattage  box mod. the Groove adjusts from 3.0 to 6.0 Volts in 0.1 volt increments or 3.0 to 15 Watts in .5 Watt increments and has a small back lit OLED display.  The Groove has a maximum output of 5 Amps.  The Groove can read your output voltage, battery voltage and cartom...

Price:

192.21RON

279.28RON Add to Cart
Kit Lavatube L-Rider Transformer

Kit Lavatube L-Rider Transformer

MODEL L-RIDER TRANSFORMER The Kit contains the following : -L-Rider Transformer body -2 batteries 18650 with a capacity of 1800 mAh -TrustFire TR001 charger -2 Clearomizers CE5 without wick -eGo Case -Intructions manul in english Technical characteristics L-Rider Transformer body : Length : 136 mm (with 18650 battery ) or 107 mm ( with 18350 battery ) Diameter : 22 mm Material : Chrome Model : Transformer Certifi...

Price:

241.38RON

406.80RON Add to Cart
Innokin iTaste MVP 2.0 with iClear 30 full kit

Innokin iTaste MVP 2.0 with iClear 30 full kit

Innokin iTaste MVP 2.0 with iClear 30 full kit The iTaste MVP 2.0 is a 510/Ego threaded device with a built-in 2600mAh battery. This box mod is loaded with features such as VV, VW, passthrough function, LCD screen, ohm meter and can even be used as an on-the-go charger for your portable devices.  The new function of MVP2.0 is variable wattage (you can adjust output wattage from 6.0 - 11.0 W in 0.5 watt increments) . It also have other substantial improvements in both appeara...

Price:

192.21RON

251.17RON Add to Cart
Innokin iTaste SVD original telescopic mod with variable voltage/wattage

Innokin iTaste SVD original telescopic mod with variable voltage/wattage

Innokin iTaste SVD original telescopic mod with variable voltage/wattage The iTaste SVD very well be Innokin's finest advanced personal vaporizer to date. This APV is packed to the brim with useful features. Not only that, but the SVD is a real powerhouse.  You could say that the Innokin SVD packs beauty, brawn and brains all in the same package!   Innokin's hot new device starts out with a telescoping body that features two swappable tube sizes. This allows ...

Price:

133.80RON

247.77RON Add to Cart
Vamo Body - Detachable VV and VW Mod

Vamo Body - Detachable VV and VW Mod

Vamo Body - Detachable VV and VW Mod This Vamo body with variable voltage and variable watts it is a new well designed mod . It's special feature is that it is detachable and it can work with a 18350 battery ( having mounted just a mini segment ) or two 18350 batteries ( having mounted two mini segments ) . It can also work with a 18650 battery ( two mini segments ) . The output voltage can be adjusted from 3V to 6V in steps of 0.1V and the working power from 3 Watts to 15 Wa...

Price:

169.07RON

208.37RON Add to Cart
Smoktech Vmax Variable Voltage Electronic Cigarette ( VV Mod ) - full kit

Smoktech Vmax Variable Voltage Electronic Cigarette ( VV Mod ) - full kit

Smoktech Vmax Variable Voltage Electronic Cigarette ( VV Mod ) This is an elegant and stylish variable voltage mod , which combines the performance with an accessible price . It has long autonomy batteries and it can be totally customized on your taste . You can very easily visually adjust the voltage , in steps of 0.1 V from 3V to 6V . Short description of Vmax Variable voltage mod:  Variable voltage from 3V to 6V with 0.1 V LED display , which allows you to ch...

Price:

192.21RON

348.48RON Add to Cart
Kit Lavatube Robust 14500 - model 2013 - bonus 30ml e-liquid

Kit Lavatube Robust 14500 - model 2013 - bonus 30ml e-liquid

2013  Lavatube Robust 14500 The Kit contains the following : -Lavatube Robust 14500 body -2 Li-ion batteries 14500 with a capacity of  650 mAh and protection -Clearomizer CE4 -Charger for batteries -eGo Case -Intructions manul in english bonus 30ml e-liquid Technical characteristics Robust 14500 body : Length : 106 mm Diameter : 17 mm Model : Robust Certificates : CE,RoHS,UL,UN38.3 Manufa...

Price:

192.21RON

290.19RON Add to Cart
Vmax - Stainless steel VV Mod - body

Vmax - Stainless steel VV Mod - body

Vmax - Stainless steel VV Mod The Vmax stainless steel mod is the latest vmax mod . This is an elegant and stylish variable voltage mod , which combines the performance with an accessible price . It has long autonomy batteries and it can be totally customized on your taste . You can very easily visually adjust the voltage , in steps of 0.1 V from 3V to 6V . Short description of Vmax Variable voltage mod:  Variable voltage from 3V to 6V with 0.1 V LED display...

Price:

262.77RON

301.85RON Add to Cart
Hana Modz V3 Mini Black DNA 30 E-Cig Mod

Hana Modz V3 Mini Black DNA 30 E-Cig Mod

Hana Modz V3 Mini Black DNA 30 E-Cig Mod.   Product Details:   510 threaded connector Variable Wattage from 7W-30W in 0.1 watt increment Body is made of anodized aluminum OLED display shows battery charge state, volts and ohms Built in 1500mah Lithium Polymer battery Micro-USB charging port Compatible with 0.5ohm~3.3ohm atomizers Input voltage/current: 3.2-4.3V/1.5-7A Output voltage/current: 4-8V/10A Random se...

Price:

297.32RON

390.48RON Add to Cart